TeeJet FieldPilot Install Case 71x0-72x0-89x0 - Manual (Page 16)

14
www.teejet.com
FieldPilot ®
C. Steering Orbital on the Top Side
Pre-assemble the load sense shuttle (G) with the adapters provided (J) and (I) as illustrated. Locate the tractor
load sense hydraulic hose on the top of the steering orbital as illustrated. Remove the tractor load sense hydraulic
hose from the steering orbital and connect hose (P) to the load sense port on the steering orbital and to the end
of the load sense shuttle (J) as illustrated. Attach the center position (I) of the assembled load sense shuttle to
the tractor load sense hose.
Figure 1-13: Installing the Tractor Load Sense Shuttle Adapter
i
J
G
J