The Shrunks Stepaire Bandit Nap Pad - Manual (Page 2)

- Do not use product if repair is needed.
- Clean product regularly per the Cleaning section of manual.
- Check storage area. Make sure it is rodent free and dry.
- When disposing of product do so in such a manner that no hazardous conditions exist at
the time the product is discarded.
CLEANING
If your Nap Pad is used intensively, then it should be cleaned on a weekly basis. It is also
important to clean and dry the product before it is packed away.
- The inner inflatable mattress must be removed from the Nap Pad before machine wash-
ing. To wash the Nap Pad, machine wash warm at 40ºC. Do not bleach. Do not iron. Do not
dry clean. Do not tumble dry.
- When cleaning your product never use strong detergents or silicone-based products.
- Also never use high pressure cleaning equipment such as a “pressure washer”.
This will result in damage to your product.
STORAGE
When storing your Nap Pad, keep it in a clean and dry place that is not affected by major
variations in temperatures and other damaging factors. You can store your Nap Pad deflated
and rolled up or lightly inflated. Be careful never to stack anything on top of Nap Pad.
REPAIRS
All of our inflatable products include repair kit patches. You can easily repair minor
punctures and cuts. This kit includes 2 round pieces of self-adhesive material to patch the
Nap Pad;
Conditions necessary for successful repair:
Relative humidity less than 65 % / Temperature Range between 63°-77° Fahrenheit (17°-
25°) Celsius. Avoid completing repairs in direct sunlight or rain and ensure that the material
is fully deflated and lies flat.
A. First, you need to locate the hole. The easiest way is to fully inflate the product and listen
for a leak, or to spray with soapy water and look for bubbles. You then need to deflate the
product.
1. Make sure the valve stem plug is
closed prior to inflation. This valve is
located underneath the Nap Pad.
2. The Stepaire Nap Pad can be inflated by simply stepping
on the built-in pump (located directy beneath the Stepaire
logo, at the bottom end of the Nap Pad).
TIP: It takes approximately 40-50 steps to inflate the air
mattress inside.
DEFLATION
Prior to deflation, remove all children from the bed!
1.Open the valve stem plug
2. With the Nap Pad placed flat on the floor, begin pushing
the air out by rolling the Nap Pad, starting from the top end,
and work your way towards the bottom of the Nap Pad.
3. Roll the Nap Pad to desired size, and place into carrying bag (included). Store until
next use.
MAINTENANCE
Maintenance is essential to increase the life of your product. Please follow all maintenance
and repairs according to this manual. If you are unsure please contact The Shrunks directly.
- Inspect product regularly for potentially unsafe conditions, particularly after storms, and
suspected misuse of product.