TL Audio A4 - Manual (Page 5)

5
A correctly designed balanced interface should have both phase and non-phase signals
of equal magnitude (and source impedance), but should allow either of the phase and
non-phase signals to be connected to an arbitrary electrical point (e.g. ground) without
changing the differential level. Therefore, if, for instance, the non-phase signal is
shorted to ground by an unbalanced input on a piece of equipment, then the phase
signal should double in magnitude to compensate. Such an arrangement is referred to
as “floating” or “ground-free”. Balanced signals require 3 pin connectors, such as
XLR’s or TRS jack plugs, carrying the phase and non-phase signals, plus a screening
ground connection.
Naturally, the Ebony Series features balanced, ground-free signals for all line inputs
and outputs, as well as insertion points where present. The range is also compatible
with unbalanced equipment, as described above.
Please read this manual fully before installing or operating the Processor.