Toa BG-235 - Manual (Page 11)

11
8. MOH OUTPUT ASSIGNMENT
Outputs the input set by the Function switch to the MOH output function.
Use the rear-mounted MOH volume control [LEVEL] to adjust the output level.
Notes
Following are precautions on the MOH output.
• Each individual input level setting cannot be performed (the volume control does not work). Adjust the
volume level at the input equipment as needed.
• Bass and treble controls do not work.
• Mute control does not work.
[MOH Output Setting]
Set the input to be output to the MOH output by placing the Function
switch to ON.
The Function switch Nos. correspond to the inputs as follows.
Function switch No. 1: MIC/LINE 1 input
Function switch No. 2: LINE 2 input
Function switch No. 3: LINE 3 input
9. 2-CHANNEL BROADCAST
Input signals set in Section 8 are output to the MOH output.
2-channel broadcast can be performed when the unit is used in conjunction with the optional BA-235 (35 W)
or BA-260 (60 W).
(Example)
When MIC/LINE 1, LINE 2, and LINE 3 input signals are output to the Zone 1, and LINE 3 input signals to the
Zone 2.
Sound source A
Sound source B
Sound source C
MIC/LINE 1 SPEAKER OUT
MOH OUT
LINE 2
LINE 3
(BG-220 or BG-235)
MOH output assignment
(ZONE 1)
Sound source A
Sound source B
Sound source C
LINE IN
SPEAKER OUT
(BA-235 or BA-260)
(ZONE 2)
Sound source C
Function switch Nos. 1, 2, and 3
MOH ASSIGN
1. MIC/LINE 1
2. LINE 2
3. LINE 3
7. AUTO MUTE (MIC/LINE 1)
8. MIC (ON)/LINE (OFF)
4. - - - - -
5. LINE 2
6. LINE 3
MUTE RECEIVE
OFF
ON