Toa SX-2000 Series Manual - Manual (Page 53)

4-11
Chapter 4: SX-2000AO AUDIO OUTPUT UNIT
V O L U M E C h 3 – 4 0 d B : C O N F I G V O L U M E
/CANCEL
OK /
[Volume Setting Display (AO5), Volume Setting Detail Display (AO6)]
Indicates the output volume level set using the SX-2000 Setting Software in the output level meter.
Besides, on the Volume Setting Detail Display screen, the set value for each output channel can be confirmed
numerically.
Pressing the plus key increases the channel number by one and displays the setting value for that channel.
Pressing the minus key decreases the channel number by one and displays the setting value for that channel.
When these screens are displayed, the entire fluorescent display is as follows:
COM
FAULT
KEYLOCK
EMERGENCY
OL
0
–10
–20
–30
–40
OL
0
–10
–20
–30
–40
FADER
LEVEL LEVEL
1 2 3 4 5 6 7 8
3 3
1 2
Indicates the levels set using the SX-2000 Setting Software.
Lights
Lights
The indicator of the channel selected for monitoring lights. When
the output volume control is operated, the corresponding channel
indicator lights.
Lights when the output status is on, and goes off when the output
turns off. However, when the output volume is muted, this
indicator goes off. Also, when the output volume control or
channel ON/OFF is operated, the indicator of the corresponding
channel lights.