Toa SX-2000 Series Manual - Manual (Page 70)

5-12
Chapter 5: SX-2100AO AUDIO OUTPUT UNIT
V O L U M E C h 4 – 3 0 d B : P A N E L V O L U M E
/CANCEL
OK /
[Front Panel Volume Display (ao7), Front Panel Volume Detail Display (ao8)]
Indicates the output volume level set using the front panel's output volume control in the output level meter.
Besides, on the Front Panel Volume Detail Display screen, the set value for each output channel can be
confirmed numerically.
Pressing the plus key increases the channel number by one and displays the setting value for that channel.
Pressing the minus key decreases the channel number by one and displays the setting value for that channel.
When these screens are displayed, the entire fluorescent display is as follows:
COM
FAULT
KEYLOCK
EMERGENCY
OL
0
–10
–20
–30
–40
OL
0
–10
–20
–30
–40
FADER
LEVEL LEVEL
1 2 3 4 5 6 7 8
3 3
1 2
Indicates the levels set using the Output volume controls.
Lights
Lights
The indicator of the channel selected for monitoring lights. When
the output volume control is operated, the corresponding
channel indicator lights.
Lights when the output status is on, and extinguishes when the
input turns off. However, when the output volume is muted, this
indicator extinguishes. Also, when the output volume control or
channel ON/OFF is operated, the indicator of the corresponding
channel lights.