Toa C-BC850U User Manual

Flush ceiling mounting bracket c-bc850u, Warning

Advertising
background image

FLUSH CEILING
MOUNTING BRACKET

C-BC850U

Thank you for purchasing TOA's Flush Ceiling Mounting Bracket. Please carefully follow the instructions in this
manual to ensure long, trouble-free use of your equipment.

INSTRUCTION MANUAL

1. SAFETY PRECAUTIONS

• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe

operation

• Make sure to observe the instructions in this manual as the conventions of safety symbols and messages

regarded as very important precautions are included.

• We also recommend you keep this instruction manual handy for future reference.

Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.

WARNING

When Installing the Unit

• Install the unit only in a location that can structurally support the weight of the unit and the mounting bracket.

Doing otherwise may result in the unit falling down and causing personal injury and/or property damage.

• Avoid installing or mounting the unit in unstable locations, such as on a rickety table or a slanted surface.

Doing so may result in the unit falling down and causing personal injury and/or property damage.

• Ensure that all screws and fixing mechanism are securely tightened. If they are not tightened or firmly

secured after installation, the unit could fall down, possibly resulting in personal injury.

• Do not use other methods than specified to mount the bracket. Extreme force is applied to the unit and the

unit could fall off, possibly resulting in personal injuries.

• Tighten each nut and bolt securely. Ensure that the bracket has no loose joints after installation to prevent

accidents that could result in personal injury.

• Avoid installing the unit in locations exposed to sea breeze or corrosive gas. The unit or its mounts may be

subject to corrosion, that might cause it to fall or result in other accidents.

• Do not mount the unit in locations exposed to constant vibration. The mounting screws and/or bolts may be

loosened by excessive vibration, potentially causing the unit to fall, which could result in personal injury.

Advertising