Toa C-CC774 PL - Manual (Page 22)

22
7. Connect the safety wire to the housing projection, then attach the camera unit.
Note: Align mark of the camera unit with that of the housing when attaching the camera unit to the housing.
Hang the safety wire.
Safety wire
mark
6. Using the supplied 3 hexagon socket screws, attach the top cover 1 to the housing.
Hexagon socket screw
M4 x 8 (supplied with)
Hexagon socket screw
M4 x 8 (supplied with)
Aligning the positioning marks
at the time of camera unit fixation
Duct
Camera unit
When attaching the camera unit, align the arrow
on the label with the black screw on the duct.
Black screw
Align th
e arrow
on the left
side w ith the black
screw on the d
uct.
Shaded area
Note
Do not hold the shaded area tight when installing the
camera unit.
If strong force is applied to this part, it may deform
slightly, causing the camera to malfunction.