Top Flite TOPA0155 - Manual (Page 6)

❏ Razor Plane (MASR1510)
❏ English size drill bits: 17/64" (or 1/4"), 1/4",
7/32", 3/16", 5/32", 1/8", 7/64", 3/32", 1/16"
-or-
❏ Metric size drill bits: 6.7mm (or 6.4mm), 6.4mm,
5.6mm, 4.8mm, 4mm, 3.2mm, 2.8mm, 2.4mm,
1.6mm
❏ 1/4-20 Tap and #7 [5.1mm] drill for wing bolts
(GPMR8105)
❏ 8-32 Tap and #29 [3.45mm] drill for engine
mounting (GPMR8103)
❏ Denatured or Isopropyl Alcohol (to clean up
excess epoxy)
❏ Sanding tools and assorted sandpaper (see
Easy-Touch ™ Bar Sander that follows)
Optional Supplies and Tools
Here is a list of optional tools mentioned in the
manual that will help you build the Sea Fury.
❏ Long handle 9/64" ball end hex wrench
(GPMR8004)
❏ Silver Solder (GPMR8070 w/flux)
❏ Masking Tape (TOPR8018)
❏ Great Planes Plan Protector (GPMR6167) or
wax paper
❏ Dremel ® #178 cutting bit (for countersinking
screws in the servo hatch covers)
❏ Robart ® Super Stand II (ROBP1402)
❏ Great Planes CG Machine ™ (GPMR2400)
❏ Top Flite Precision Magnetic Prop Balancer ™
(TOPQ5700)
❏ Straightedge with scale (HCAR0475)
❏ Cutting mat (HCAR0456)
❏ CA Debonder (GPMR6039)
❏ 6-Minute epoxy (GPMR6045)
❏ Milled fiberglass (GPMR6165)
❏ Microballoons (TOPR1090)
❏ R/C-56 Canopy Glue (JOZR5007)
❏ Epoxy brushes (GPMR8060)
❏ Mixing cups (GPMR8056)
❏ Mixing sticks (GPMR8055)
❏ Threadlocker (GPMR6060)
❏ Non-elastic monofilament or Kevlar fishing line
for stab and wing alignment (K+SR4575)
❏ Builders Triangle Set (HCAR0480) (for fin
alignment)
❏ Felt-Tip Marker (TOPQ2510)
❏ Small metal file
❏ Rotary tool such as Dremel
❏ Rotary tool reinforced cut-off wheel
(GPMR8020)
❏ Curved Tip Canopy Scissors for Trimming
Plastic Parts (HCAR0667)
❏ Dead Center™ Engine Mount Hole Locator
(GPMR8130)
❏ Great Planes AccuThrow ™ Deflection Gauge (for
measuring control throws, GPMR2405)
EASY-TOUCH ™ BAR SANDER
A flat, durable, easy to handle sanding tool is a
necessity for building a well finished model. Great
Planes makes a complete range of Easy-Touch Bar
Sanders (patented) and replaceable Easy-Touch
Adhesive-backed Sandpaper. While building the
Sea Fury, we used two 5-1/2" Bar Sanders and two
11" Bar Sanders equipped with 80-grit and 150-grit
Adhesive-backed Sandpaper.
Here’s the complete list of Easy-Touch Bar Sanders
and Adhesive Backed Sandpaper:
5-1/2" Bar Sander (GPMR6169)
11" Bar Sander (GPMR6170)
22" Bar Sander (GPMR6172)
33" Bar Sander (GPMR6174)
44" Bar Sander (GPMR6176)
11" Contour Multi-Sander (GPMR6190)
12’ roll of Adhesive-backed:
80-grit sandpaper (GPMR6180)
150-grit sandpaper (GPMR6183)
180-grit sandpaper (GPMR6184)
220-grit sandpaper (GPMR6185)
Assortment pack of 5-1/2" strips (GPMR6189)
We also use Top Flite 320-grit (TOPR8030, 4 sheets)
and 400-grit (TOPR8032, 4 sheets) wet-or-dry
sandpaper for finish sanding.
Recommended covering tools
and accessories
❏ Top Flite Heat Gun (TOPR2000)
❏ Top Flite Trim Seal Tool (TOPR2200)
-and-
❏ Top Flite Sealing Iron (TOPR2100)
❏ Top Flite Hot Sock
™ (TOPR2175)
-or-
❏ 21st Century ® Sealing Iron (COVR2700)
❏ 21st Century Cover Sock (COVR2702)
- 6 -