Traveler Guitar Pro-Series - Manual (Page 4)

SET-UP
USING THE STETHOPHONE:
1. Plug the Stethophone into the Stethophone Jack. It
should fit snuggly.
2. You can manipulate the tone of the Stethophone using
the provided allen wrench to adjust the screw located
between the serial plate and rollers on the back of the
guitar. Use subtle adjustments.
3. The width of the Stethophone headset is also adjustable
by bending the “U” shaped spring between the
earpieces.
SETUP:
Your new Traveler Guitar Pro-Series will arrive in what we refer to as the “stowed position”. To prepare your
guitar for play, there are a few short steps to follow:
1. Detach lap-rest from stowed position on back of guitar by unscrewing the thumb screw / strap button
2. Place lap-rest in playing position and tighten the thumb screw only finger tight. (Over-tightening can dent
wood or damage threads). See video here.
3. The short thumbscrew in the included accessories bag can be installed in the screw hole at the heel of the
neck to facilitate use of a strap.