TRUE Systems P-SOLO - Manual (Page 6)

P-SOLO OPERATION MANUAL
6
INSTALLATION
Unpacking and Inspection
We recommend that you inspect your
P-SOLO upon unpacking it from the factory
shipping carton. In the unlikely event that the unit exhibits any physical damage, DO
NOT connect it to the AC mains power, but contact your dealer immediately.
In addition to the P-SOLO, the shipping carton should also include:
 An AC power cord
 A warranty registration card
 This Operation Manual
We recommend that you keep the shipping carton and foam inserts in the event that the
unit must be shipped at some time in the future. DO NOT package the unit in “packing
peanuts” or similar material as it will settle during shipping and damage may occur. If
original packing materials cannot be located, wrap the unit with plastic “bubble wrap”
material extending at least 2” beyond the extremities of the
P-SOLO enclosure.
Mounting
The
P-SOLO is designed for placement on your desktop, or any convenient flat surface.
It’s light weight and compact enclosure make it easy to carry by hand or in your gig bag.
If you wish to rack mount the unit, please visit our website (www.true-systems.com) for
recommended accessories and mounting procedure.
 Do not locate the unit where it is exposed to rain, moisture, or liquid spills.
 Do not locate the unit where it is exposed to temperature extremes.
 Avoid locating the unit next to equipment that emits strong electromagnetic fields.
 Avoid using mic, output, or instrument cables that are too short. While the P-
SOLO is quite stable for its size and shape, stepping or pulling on a short, taught
cable may move it out of place, possibly causing damage.