TYREDOG TD-1300A-X5 Owners Manual User Manual
Page 28
27
Troubleshooting
If any sensors are failing to give a reading, or you feel an incorrect reading is
being given, follow this procedure;
1. Turn the monitor off.
2. Remove batteries from all sensors.
3. Remove all sensors from valves.
4. Turn the monitor back on.
5. Insert batteries into sensors one by one.
6. Fit sensors to valves one by one.
If you feel your system has a fault which cannot be rectified by this procedure,
please contact your Tyredog dealer.
Always ensure batteries have enough power before inserting into sensors.
If unsure, use a battery from a known working sensor.
It is normal for the screen to turn dark after extended exposure to sunlight.
Always be aware that heat and extended driving periods can greatly alter tyre
pressure and drivability.
Note: Sensors may not always come online straight away when the
monitor/receiver is turned on as they require movement / vibration.
This may take a few minutes once the wheels begin rotating.