Cortelco 879015-TP2-27S - Manual (Page 17)

- 16-
Predialed Call
Press Redial/Pause to view the last dialed number. If more than 15 digits, display the first 14 digits and –. If there
is no number in the Redial list, display will shows NO NUMBER for 2 sec and exits to idle state.
Lift the handset or Press Speaker or Dial (activate Handsfree when the handset is on cradle). Dialed digits will be
displayed one by one from left to right and then shifted to left one by one when the number of digits exceeds 15.
To delete the Last Dialed Number
In idle state, press Redial/Pause to view the last dialed number.
Press Delete once and then exit to idle state.
Temporary Tone Dialing
Temporary tone dialing is used only when you have Pulse (rotary) service. It allows you access to services that
require tone signaling, including some Tone-Activated Computer Systems or phone-banking.
To change from Pulse (rotary) to Tone dialing during a call, do the following:
1. Dial a phone number in PULSE (Tone / Pulse Switch at PULSE position).
2. Press the * Button, all buttons pressed after this will send only tone signals to the computer or phone banking
system.
3. After you hang up, the phone automatically returns to Pulse (rotary) service.