Cortelco 879015-TP2-27S - Manual (Page 24)

- 23-
Message Waiting does not work
Check with your telephone company if this service is
available or if you have subscribed to it.
Pressing a Memory button does not display number Your Memory button has no stored number.
Please store the number again by pressing the PROG
Button, dialing the number and pressing the Memory
Button you want.
CARE AND MAINTENANCE
1. Clean your phone with a damp (never wet) cloth. Solvent or detergent should never be used.
2. If your phone stops working, check to be certain that all modular plugs are properly “snapped” into their jacks. If
the phone still doesn’t work and you have other telephones installed in your home, check to see if they are
working. If they are, try using your telephone on another outlet. If it still doesn’t work, it is more than likely that
there is a problem with your telephone. In this case, return the unit for service in accordance with the
instructions on your warranty card.
DO NOT CALL THE TELEPHONE COMPANY SINCE YOU MAY BE RESPONSIBLE FOR CHARGES FROM
THEM. CHARGES FROM THE TELEPHONE COMPANY ARE NOT COVERED BY THE TERMS AND
CONDITIONS OF THE WARRANTY.
3. If other telephones in your house have also stopped working, the problem is most likely with your telephone
line service. Do not return your telephone for service since most likely there is nothing wrong with it. You
should however, consult with your telephone company to see if there has been any interruption to your line
service.
.