VACUUBRAND MZ 4C - Manual (Page 11)

Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. Manual-no.: 997999 / 24/04/2008
page 11 of 28
exhaust waste vapour condenser with cover
(protection against glass splinters in the event of
breaking, thermal isolation avoid condensation of
humidity)
overpressure safety relief
device at the exhaust
waste vapour condenser
round bottom flask as
catchpot at exhaust waste
vapour condenser
round bottom flask as
separator at inlet
MD 4C + AK + EK
(mounted to pump support with catchpot at inlet and exhaust waste vapour condenser)
MD 4C + AK Synchro + EK
(mounted to pump support with catchpot at inlet and exhaust waste vapour condenser)
inlet
round bottom flask as
separator at inlet
overall dimensions (L x W x H) in mm: 350 x 275 x 495
mass approx.: 19,9 kg
overall dimensions (L x W x H) in mm: 350 x 279 x 495
mass approx.: 20,9 kg
handle
handle
round bottom flask as
catchpot at exhaust waste
vapour condenser
exhaust waste vapour condenser with cover
(protection against glass splinters in the event of
breaking, thermal isolation avoid condensation of
humidity)
inlet with
non return valve
flow control
diaphragm
on/off switch
on/off switch
overpressure safety relief
device at the exhaust
waste vapour condenser
cooling water inlet
(hose nozzle 6 mm)
cooling water outlet
(hose nozzle 6 mm)
cooling water inlet
(hose nozzle 6 mm)
cooling water outlet
(hose nozzle 6 mm)