VACUUBRAND ME 2S - Manual (Page 3)

Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. Manual-no.: 69 61 28 - 99 56 52 / 20/03/2008
Notice: Customized equipment
Date: 20.03.2008
Equipment (Product): ME 2S - 230 V 50/60 Hz
Material No.: 69 61 28
Instructions for use for the standard equipment: ME 2
The customized product identified above is based on a standard product which
has been modified following the customer´s requirement for modification.
Therefore, certain features of the customized product are different from those of
the corresponding standard product. In general we do not have sufficient experi-
ence whether the modifications made meet the customer´s requirements. It is the
customers responsibility to check the suitability of the equipment for the in-
tended application
prior to use.
The instructions for use of the standard product are enclosed.
It is the user‘s responsibility to check very carefully if specific information given
in the instructions for use can be applied to the customized product.
In particular, the following differences have to be considered:
Diaphragm pump ME 2 with
- silencer at the inlet and at the outlet
- diaphragm made of PTFE
- diaphragm clamping disc made of ETFE (20% carbon fibre)
Without handle.
Spare parts:
1x Silencer (inlet) ....................................................................................................................... 63 96 92
1x Silencer (outlet) ..................................................................................................................... 63 96 91
1x Diaphragm (PTFE) ................................................................................................................ 63 70 28
2x Valve (PTFE) ......................................................................................................................... 63 76 25
1x Face wrench ........................................................................................................................... 63 75 80
Attention: The inserts of the silencers are made of rubber foam.
➨ Check the compatibility of the material of the inserts with the pumped substances.
☞ If the specified values are not attained: Silencer clogged?
outlet
on/off switch
inlet
hose nozzle NW 10