VACUUBRAND GKF 1000i - Manual (Page 8)

Documents are only to be used and distributed completely and unchanged. It is strictly the users’ responsibility to check carefully
the validity of this document with respect to his product. Manual-no.: 999076 / 19/09/2012
page 8 of 8
Accessories / Spare parts
Special coupling ......................................................................................................................... 667057
(stainless steel; coupling to connect a glass tube with outer diameter 22 mm to a small flange NW 16)
Special coupling ......................................................................................................................... 667055
(stainless steel; coupling to connect a glass tube with outer diameter 22 mm to a small flange NW 25)
Coupling ...................................................................................................................................... 662705
(stainless steel; to connect a ground joint NS 29/32 to a small flange NW 25)
O-ring 3.5 x 1.5, FPM (at the condensate drain valve)................................................................3120560
Maintenance and cleaning
- The cold trap is maintenance-free.
- Clean the metal cover of the cold trap using water only.
- Clean the coolant chamber and the condensate chamber using water or solvent.
Ensure compatibility of the wetted parts.
☞ Comply with applicable regulations when disposing of solvents.
VACUUBRAND GMBH + CO KG
-Technology for Vacuum Systems-
© 2012 VACUUBRAND GMBH + CO KG Printed in Germany
Alfred-Zippe-Str. 4 · 97877 Wertheim / Germany
T +49 9342 808-0 · F +49 9342 808-5555
[email protected] · www.vacuubrand.com
Remove the cold trap from the vacuum installation to drain the coolant if necessary.