Watt – Wilson Audio WATT Series 7 User Manual
Page 17
1-5
of this size.”
c
Are
oF
The
F
in
-
ish
oF
y
our
WATT
s
Your WATT loudspeaker enclosures are hand-painted with Wilsongloss
™
paint
and hand-polished to a high luster. While the paint seems quite dry to the touch, final
curing and complete hardening takes place over a period of several weeks. To protect
the finish of the WATTs during final manufacture, shipment, and setup in your listening
room, we have applied a removable layer of protective film over the finish. We recom-
mend that this film be left in place until the speakers are in their final location in your
listening room. Once you have determined their final position, remove the film by peel-
ing it off. Do not leave this film on indefinitely, as it will leave impressions on the
paint. It is important that the delicate paint finish of the WATT be dusted carefully with
the dust cloth, which has been provided. We recommend that the following procedure
be observed when dusting the speakers:
•
Blow off all loose dust
•
Using the special dust cloth as a brush, gently whisk
off any remaining loose dust
•
Shake out the dust cloth
•
Dust the finish, using linear motions in one direction parallel to
the floor. Avoid using circular or vertical motions.
W
a T T
i
n T r o d u C T i o n