Casio EXILIM EX-ZR15 - Manual (Page 50)

50
Snapshot Tutorial
To shoot with Continuous Shutter, press [BS] (BEST
SHOT) and then select the “High Speed CS” scene.
NOTE
• To return from the “High Speed CS” HS BEST
SHOT scene to the Single Shot mode, press
[AUTO].
With High Speed CS, you can configure the camera to shoot at a speed of 3, 5, 10,
15, or 30 images per second, as long as you keep the shutter button and there is
memory available to store the images. With Prerecord CS, half-pressing the shutter
button starts continual pre-recording of images to a temporary buffer. Then when you
press the shutter button the rest of the way down, the camera stores what is currently
in the buffer and starts real-time continuous shutter recording of new images. Real-
time recording continues until you release the shutter button or until a total of up to
30 images (buffer images plus new images) are recorded. You can configure
Prerecord CS to specify how many of the 30 images are recorded in the buffer and
how many are recorded after you fully press the shutter button. Use Prerecord CS
when you want to make sure you do not miss fast-moving action.
* You can record up to 30 images (pre-recorded buffer images plus real-time images) for
each Prerecord CS operation.
Using Continuous Shutter
Using High Speed CS and Prerecord CS
[BS] (BEST SHOT)
Shutter button half-press
Recorded images (up to 30 images)
Continuous recording of images until shutter
button released*
Shutter button release Shutter button full-press
Pre-recorded images