Casio EXILIM EX-ZR15 - Manual (Page 92)

92
Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * AF Area
You can use the following procedure to change the Auto Focus metering area for
shooting snapshots.
• When recording movies, the AF metering area is always “Í Spot”.
• “Ë Tracking” cannot be used in combination with some BEST SHOT scenes.
• “I Multi” cannot be selected for the AF area while Face Detection is enabled.
Specifying the Auto Focus Area (AF Area)
Intelligent
The camera automatically determines the focus point on the
screen and focuses there (intelligent AF).
• Face detection (page 93) operates automatically.
Spot
This mode takes readings of a small area in the center of the
image. This setting works well with focus lock (page 89).
Multi
When you half-press the shutter button while this setting selected,
the camera will select the optimum Auto Focus area from among
nine possible areas. The focus frame of the area where the
camera focuses will be displayed in green.
Tracking
When you half-press the shutter button while this setting is
selected, the focus frame will follow the movement of the subject.
“Ò Intelligent” “Í Spot” or “Ë Tracking” “
I
Multi”
Т
Н
I
Ë
Focus frame Focus frame Focus frame