Step 4, Ab c d 8 – Winco Fuel Shut-Off Solenoid Kit HPS6000HE/I & HPS9000VE/E (2013) User Manual
Page 4
Advertising
4
3256-00
64854-005I
STEP 4
Using the cable ties (ref. 8) provided, neatly tie excess wire loom, wire and power
cable to prevent rubbing on the engine. HPS9000VE/E shown below.
TO START: Hold down control box button, turn key, engine will start. Once unit
generates power (about second) release button.
•
•
Winco Inc.
Service Dept.
507-357-683
STEP 3 HPS9000VE/E
Take battery positive cable loose from starter solenoid (A). Route RED wire # 2
through the rubber cable protector (B) and re-tighten starter solenoid nut (C).
Take battery negative cable loose from engine base (D). Place BLACK wire #
under the bolt and re-attach battery negative cable to engine base.
•
•
A
B
C
D
8
Advertising