General settings — psm, Adjusting the sound, English – JVC KD-G631 User Manual

Page 15

Advertising
background image

15

ENGLISH

General settings — PSM

You can change PSM (Preferred Setting Mode) items
listed in the table that follows.

1

2

Select a PSM item.

3

Adjust the PSM item selected.

4

Repeat steps

2

and

3

to adjust other PSM

items if necessary.

5

Finish the procedure.

Adjusting the sound

You can adjust the sound characteristics to your
preference.

1

2

Indication, [Range]

BAS

*

1

(bass), [–06 to +06]

Adjust the bass.

MID*

1

(mid-range), [–06 to +06]

Adjust the mid-range frequencies sound level.

TRE

*

1

(treble), [–06 to +06]

Adjust the treble.

FAD

*

2

(fader), [R06 to F06]

Adjust the front and rear speaker balance.

BAL (balance), [L06 to R06]
Adjust the left and right speaker balance.

LOUD

*

1

(loudness), [LOUD ON or LOUD OFF]

Boost low and high frequencies to produce a well-
balanced sound at low volume level.

VOL (volume), [00 to 30 or 50

*

3

]

Adjust the volume.

*

1

When you adjust the bass, mid-range, treble, or

loudness, the adjustment you have made is stored
for the currently selected sound mode (iEQ) including
“USER.”

*

2

If you are using a two-speaker system, set the fader

level to “00.”

*

3

Depending on the amplifier gain control setting. (See

page 17 for details.)

Continued on the next page

EN06-15_KD-G632_1_003A_pre.indd 15

EN06-15_KD-G632_1_003A_pre.indd 15

10/17/06 12:29:54 PM

10/17/06 12:29:54 PM

Advertising
This manual is related to the following products: