JVC KD-G631 - Manual (Page 27)

ENGLISH
27
Continued on the next page
Symptoms Remedies/Causes
USB memory playback
• Noise is generated. The track played back is not an MP3/WMA track. Skip to
another file. (Do not add the extension code <.mp3> or
<.wma> to non-MP3 or WMA tracks.)
• “CHECK” keeps flashing on the display. • Readout time varies depending on the USB memory.
• Do not use too many hierarchy, folders, and empty
folders *.
• Turn off the power then on again.
* Folder that is physically empty or folder that contains
data but does not contain valid MP3/WMA track.
• Tracks/folders do not play back in the order
you have intended them to play.
Playback order is determined by the write-in time stamp.
The first track/folder written into the USB memory will be
the first track/folder for playback.
• “NO FILE” flashes on the display.
• “NO USB” appears on the display. Attach a USB memory that contains tracks encoded in an
appropriate format.
• “READ” and “FAILED” appear alternately on
the display.
The total number of tracks could not be accessed
properly.
• Correct characters are not displayed (e.g.
album name).
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
• While playing a track, sound is sometimes
interrupted.
MP3/WMA tracks have not been properly copied into the
USB memory.
Copy MP3/WMA tracks again into the USB memory, and
try again.
CD changer
• “NO DISC” appears on the display. Insert a disc into the magazine.
• “NO MAG” appears on the display. Insert the magazine.
• “RESET 8” appears on the display. Connect this unit and the CD changer correctly and press
the reset button of the CD changer.
• “RESET 1” – “RESET 7” appears on the
display.
Press the reset button of the CD changer.
• The CD changer does not work at all. Reset the unit (see page 2).
DAB
• “noSIGNAL” appears on the display. Move to an area with stronger signals.
• “RESET 8” appears on the display. Connect this unit and the DAB tuner correctly and reset
the unit (see page 2).
• “ANTENANG” appears on the display. Check the cords and connections.
• The DAB tuner does not work at all. Reconnect this unit and the DAB tuner correctly and reset
the unit (see page 2).
EN16-29_KD-G632_1_003A_pre.indd 27 EN16-29_KD-G632_1_003A_pre.indd 27 10/26/06 10:57:06 AM 10/26/06 10:57:06 AM