Winco ASCO 300 Accessory Connectivity Module - Manual (Page 11)

3-2 Series 300 ATSs Connectivity Module
Device Configurator Screen for Series 300 ATSs with a Power Manager
If a Power Manager is used with a Series 300 ATS, a button appears on the lower left corner
of the Connectivity Module Device Configurator screen. Press the Config PM button to
display the Power Manager Configuration screen (right side).
Power Manager Configuration
Enter or change the Power Manager Name (8 char. max.) and Location (20 char. max.)
Several configuration settings must be set appropriately as described below. Press the Update
button when finished to save the PM configuration changes.
Input Name & Output Names
Press the Config I/O Name button to display the Input Name and Output Name screen.
Enter or change the names (16 char. max.) of the inputs and outputs. Press the Update button
when finished to save theses names.
Input names
Input & Output Names Power Manager Configuration
Press Update button
when finished to save
the names. Press Update button
when finished to save the
configuration changes.
Press Config I/O Name button to
display Input & Output Names screen. Press To PM Config button to return to
Power Manager Configuration screen.
Output names
PM Name
PM Location
Update the Power Manager or Group 1 Controller first if
you need to update the server. Do not close the
browser during the updating process. The PM or CP
update request will be discarded if the browser is
l d