Winco ASCO 300 Accessory Connectivity Module User Manual
Page 22
Advertising
Connectivity Module
Ethernet TCP/IP Network Connections in Windows 2000 A-1
How to Create an Ethernet TCP/IP Network Connection in Windows 2000
1. Start Windows, then click the Start button.
Select Settings and Control Panel.
2. Click the Network and Dial-up Connections
icon.
3. Double-click the Local Area Connection icon.
4. Click the Configure button to verify installation
of the Ethernet card.
5. If the device status indicates “This device is
working properly” then proceed to the next step
and close this window.
Otherwise click the Troubleshooter button and
follow the help instructions as indicated to fix
the problem.
continued on next page
Advertising