Zapco DC-series - Manual (Page 27)

Rated power output
-RMS power, 4 ohms stereo -------
-RMS power, 2 ohms stereo -------
-RMS power, 8 ohms bridged ------
-RMS power, 4 ohms bridged ------
Signal to Noise Ratio ------------------
Frequency Response ------------------
THD@RMS Watts ----------------------
Slew rate ------------------------------
Channel Separation -------------------
Damping factor -----------------------
Fuse Rating ----------------------------
Input Sensitivity ----------------------
Dimensions (mm) ---------------------
100W x 2CH
200W x 2CH
418W x 1CH
>96dB
20Hz ~ 20KHz (+/-0.25dB)
0.06%
>29 V/µS
66dB
>800@4
15A x 3
500mV~10V (+/- 5%)
400(L) x 55(H) x 180(W)
-
SPECIFICATIONS
DC-352
The above specifications shall be modified by manufacturer for improvement without prior notice.
DC-752
200W x 2CH
370W x 2CH
>90dB
20Hz ~ 20KHz (+/-0.5dB)
0.05%
>40 V/µS
60dB
>1000@4
30A x 3
560mV~10V (+/- 5%)
600(L) x 55(H) x 180(W)
-
780W x 1CH
Rated power output
-RMS power, 4 ohms stereo -------
-RMS power, 2 ohms stereo -------
-RMS power, 8 ohms bridged ------
-RMS power, 4 ohms bridged ------
Signal to Noise Ratio ------------------
Frequency Response ------------------
THD@RMS Watts ----------------------
Slew rate ------------------------------
Channel Separation -------------------
Damping factor -----------------------
Fuse Rating ----------------------------
Input Sensitivity ----------------------
Dimensions (mm) ---------------------
50W x 4CH
90W x 4CH
180W x 2CH
>95dB
20Hz ~ 20KHz (+/-0.12dB)
0.01%
>23 V/µS
55dB (front) / 58dB (rear)
>500@4
15A x 3
500mV~10V (+/- 5%)
480(L) x 55(H) x 180(W)
-
DC-364 DC-1004
150W x 4CH
250W x 4CH
500W x 2CH
>95dB
20Hz ~ 20KHz (+/-0.5dB)
0.03%
>36 V/µS
60dB
>800@4
30A x 3
500mV~10V (+/- 5%)
600(L) x 55(H) x 180(W)
-
-27-