Ram Trucks 2015 ProMaster - Owner Manual - Manual (Page 147)

3. Briefly push and release the MODE button to select
the displayed submenu option and to open the rel-
evant setup menu.
4. Push and release the UP or DOWN button
(by single pushes) to select the new setting for this
submenu option.
5. Briefly push and release the MODE button to store the
new setting and go back to the previously selected
submenu option.
6. Push and release and hold the MODE button to return
to the main menu (short hold) or the main screen
(longer hold).
Change Engine Oil Indicator System
Change Engine Oil
Your vehicle is equipped with an engine oil change indi-
cator system. The “Change Engine Oil” message will
display in the EVIC display. The engine oil change indica-
tor system is duty cycle based, which means the engine oil
change interval may fluctuate, dependent upon your per-
sonal driving style.
Unless reset, this message will continue to display each
time you turn the ignition switch to the ON/RUN
position. To turn off the message temporarily, push and
release the MODE button. To reset the oil change indi-
cator system (after performing the scheduled mainte-
nance), refer to the following procedure.
1. Turn the ignition switch to the ON position (do not
start the engine).
2. Fully push the accelerator pedal slowly, three times,
within 10 seconds.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 145