Ram Trucks 2015 ProMaster - Owner Manual - Manual (Page 162)

Storing Stations In Memory
Push and hold the memory buttons (1 through 6) for
more than two seconds to associate the tuned station
with the pushed button. The display will show a message
in ЉMEMO 2Љ format for three seconds to confirm that the
station has been tuned in. The CH signal is then activated
and the display will show the preset number and station
frequency for three seconds Љ2 106.9Љ. The display will
then return to the previous view.
Accessing Preset Stations
When the preset buttons (1 through 6) are pushed for less
than two seconds the radio will tune in to the station
associated with that particular memory location. The
display shows the preset number and frequency of the
associated station for three seconds. The display will then
return to the previous view.
Retuning the band: When the BAND/AS button is
pushed for less than two seconds, the radio will alternate
between bands in the sequence: FM1 FM2 FM3
AM1 AM2 FM1. While changing bands from
the FM3 band to AM1, the display will show ЉAMЉ
for two seconds and when changing from the AM2
band to FM1, the display will show ЉFMЉ for two
seconds.
The display will then show the selected band and fre-
quency in the format ЉF1 106.9Љ for two seconds and then
return to the previous view.
Presetting stations with a strong signal: when the
BAND/AS button is pushed for more than two seconds,
the radio will search for the 6 best stations and automati-
cally store them in the 6 memory positions of the current
band. During the search, the display will indicate ЉFM
ASTЉ or ЉAM ASTЉ, depending on the band selected.
160 UNDERSTANDING YOUR INSTRUMENT PANEL