Ram Trucks 2015 ProMaster - Diesel Supplement User Manual
Page 27
tire pressure telltale will flash for approximately one min-
ute and then remain continuously illuminated. This se-
quence will continue upon subsequent vehicle start-ups as
long as the malfunction exists. When the low tire pressure
telltale is illuminated, the system may not be able to detect
or signal low tire pressure as intended. TPMS malfunctions
may occur for a variety of reasons, including the installa-
tion of replacement or alternate tires or wheels on the
vehicle that prevent the TPMS from functioning properly.
Always check the TPMS telltale after replacing one or more
tires or wheels on your vehicle, to ensure that the replace-
ment or alternate tires and wheels allow the TPMS to
continue to function properly.
CAUTION!
The TPMS has been optimized for the original
equipment tires and wheels. TPMS pressures and
(Continued)
CAUTION!
(Continued)
warning have been established for the tire size
equipped on your vehicle. Undesirable system opera-
tion or sensor damage may result when using re-
placement equipment that is not of the same size,
type, and/or style. Aftermarket wheels can cause
sensor damage. Using aftermarket tire sealants may
cause the Tire Pressure Monitoring System (TPMS)
sensor to become inoperable. After using an after-
market tire sealant it is recommended that you take
your vehicle to an authorized dealership to have your
sensor function checked.
NOTE:
The TPMS telltale is also accompanied by a “Low
Tire” message in the Electronic Vehicle Information Cen-
ter (EVIC). For further information refer to “Tire Pressure
Monitoring System (TPMS) in “Starting And Operating”.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 25