CFM Corporation 7000 - Manual (Page 15)

7. Raise the lid to attach the front handle.
8. Attach a handle standoff to the front of
the grill lid, as shown.
9. Insert one end of the handle into the
hole of the standoff.
10.Place other standoff onto handle and
while holding the handle in place
assemble the opposite standoff to the
lid in the same manner.
3. Hold the lid to align the hinge holes.
4. Insert a hinge pin through the hinge
hole in the lid and into the hole in the
bottom hinge strut.
5. After the hinge pin is in place, insert a
hair pin through the hole of the hinge
pin to secure it.
HINT: There is an air space between
the back of the lid and the grill bottom
where you can install the pins.
6. Repeat for the opposite side.
4.
3 .
5.
15