Coway BA13-BE - Manual (Page 21)

20
cLeanIng and MaIntaInIng your BIdet
cleaning the nozzles
1. Press the ‘nozzle cleaning’ button on the operation part to the right of the
bidet.
- Nozzle cleaning water is sprayed and the front nozzle is fully extended.
- Clean the front nozzle.
2. Press the ‘nozzle cleaning’ button on the operation part again.
- Nozzle cleaning water is sprayed, the front nozzle retracts itself, and rear nozzle
is extended fully.
- Clean the rear nozzle.
3. If you press the ‘Power’ button or the ‘nozzle cleaning’ button on the operation
part again after cleaning the nozzles, nozzle cleaning water is sprayed, and the
rear nozzle retracts itself.
- If no button is pressed for 2 minutes after the nozzle cleaning starts, the nozzle
retracts itself automatically.
if excessive force is exerted on the nozzles when cleaning them, the nozzles may no
longer work properly or break. Hold the nozzles lightly when cleaning them.
When cleaning the nozzles, Nozzle cleaning water is emitted. (However, when main
water supply is not supplied (main water supply stop status), no nozzle cleaning water is
emitted and only the nozzle is extended).
tips
cleaning the product body
apply a neutral detergent to a soft cloth or sponge and clean the product.
- Failing to do so may result in deformation or product damage.
do not use thinner or benzene.
do not clean the product using a coarse scrub or abrasive detergent.
tips
1210964 BA13 사용설명서_수출영문_(09.03.23).indd 20 2009.3.24 10:13:21 AM