Clearing the power-on password, Clearing the power-on, Password – Compaq XL280 User Manual

Page 39

Advertising
background image

P

RESARIO

N

OTEBOOK

M

AINTENANCE

AND

S

ERVICE

G

UIDE

1800 S

ERIES

T

ROUBLESHOOTING

3

Presario 1800/1800T Series

Models: XL280, XL380, XL381,

and XL390

Clearing the Power-On Password

Ä

CAUTION: Clearing the Power-on password also removes all setup attributes that
are programmed in the CMOS.

If you do not know the Power-on password, clear it by performing the following steps:

1. Turn off the Notebook.
2. Disconnect the power cord.
3.

Remove the battery

.

4.

Remove the Palmrest cover

.

5.

Remove the keyboard

.

6.

Remove the heat sink

.

7. Locate the CMOS switch to the right of the CD/DVD drive on the system board.
8. Slide the black switch to the right

1

holding it in this position for at least 15 seconds

to ensure that the password is cleared.

9. Reassemble the Notebook (refer to the

Removal and Replacement

chapter later in

this MSG).

10. Turn on the Notebook to verify that the Power-on password has been cleared. If it has

not been cleared, repeat this procedure.

Advertising