Cobra Electronics CIR 1000 A - Manual (Page 12)

9
Step 3 – Entering A Network
 In some cases the Radio may find more than one network. Rotate the Scroll knob to cycle through
the name list, and press this knob when the name of your network is displayed
 If your network is not configured to request a password (WEP/WPA), the Radio will connect to the
network and display:
 If a WEP/WPA key (password) is required, the Radio will display the following:
 Rotate the Scroll knob to your desired one, and press to confirm.
 After a few seconds, the Radio will ask you to input the WEP/WPA code and will display the
password entry screen as follows:
a. Rotate the Scroll knob to cycle through the alpha-numeric character list. Press to select an
appointed character.
b. If you input a wrong character, scroll to the ‘ ’ icon and then press Scroll knob to delete it.
c. Press BACK to scroll up or down to the last or next line.
d. Select the icon to return to the previous page.
e. After your input is complete, scroll to the ‘ ’ icon, and then press the Scroll knob to try to access
the internet.