Cobra Electronics CIR 1000 A - Manual (Page 18)

15
FM Operation Mode
1. Press the MODE button repeatedly until <FM Mode> appears.
Or enter <Main menu>, rotate the Scroll knob to <FM>, and then press to confirm.
2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Otherwise, the last
FM station you listened to will be selected.
3. Rotate the Scroll knob to increase or decrease the frequency by 0.05MHz per step;

Note: For US version, the frequency is 0.10MHz per step.
4. For ‘auto-searching’ active stations, simply press the Scroll knob.

Note: For ‘auto-searching’ next active station:
a. Simply press the Scroll knob again.
b. The unit will display the frequency changes until it stops on the next station
c. After it runs to the end of the frequency range, it will continue it’s search from the beginning
frequency.
A. SCAN SETTING
1. Press BACK until the cursor points to <Scan setting>, and then press to confirm.
2. Rotate the Scroll knob to your desired setting, and then press to confirm.