Cabletron Systems ELS100-24TXG - Manual (Page 41)

9032947 ELS100-24TXG User Interface 27
Main Menu
The Main Menu is the first screen seen after successfully logging in to the
system. Figure 3-3 shows the Main Menu and the accompanying table
describes the Main Menu.
Figure 3-3. Main Menu
MAIN MENU Access Control: READ/WRITE
a. System Configuration Menu
b Switch Configuration Menu
c. Port Menu
d. Switch Statistics Screen
e. General Information Screen
f. Download Software Menu
g. Save Current Configuration
h. Return to Default Configuration
i. Logout
j. Reset
x. Previous Menu
Enter Selection:
Selection Description
System Configura-
tion Menu Contains commands and parameters that reflect the global con-
figuration of the switch related to management.
Switch Configura-
tion Menu Provides access to information and parameters affecting the
function of the switch, i.e. the movement of packets through the
switch. For example, you can configure Forwarding Table,
Spanning Tree, and virtual LANs (VLANs).
Port Menu Shows the configuration of the individual ports on the switch
and allows you to modify switch port operation.
Switch Statistics
Screen Presents switch-level and port-level statistics.
General Information
Screen Displays the system software version, switch serial number,
base MAC address, system up time and power-up count.
Download Software
Menu Contains parameters and commands for initiating a software
download to upgrade the switch operating software.
Save Current
Configuration Saves current switch operating parameters to non-volatile
memory.
Return to Default
Configuration Restores switch operating parameters to factory defaults. You
must reset the switch for activate default parameters.
Logout Logs out of the console interface. Once you logout, you must
enter a password before you can access the console interface
again.
Reset Performs a software reset of the switch by restarting the system
software and reloading all operating parameters.