Cabletron Systems ELS100-24TXG - Manual (Page 65)

9032947 ELS100-24TXG User Interface 51
Save Current Configuration
The Save Current Configuration screen ensures that all changes made to
the ELS100-24TXG switch via the console menus will be stored in the
event of power outages or power cycles.
To save your current configuration, do the following:
1. Select g from the Main Menu to view the Save Current Configuration
screen.
The following message prompt displays:
The current settings will become permanent.
All the saved settings will be lost!
a. OK
x. Cancel and return to the Previous Menu
2. Select either a to confirm the process or x to cancel the process.
Return to Default Configuration
The Return to Default Configuration screen allows you to restore the
original factory default switch settings before changes were made via the
user interface or SNMP.
To return to default configuration settings, do the following:
1. Select h from the Main Menu to view the Return to Default
Configuration screen.
The following message prompt displays:
Switch will return to default settings.
All the current changes and settings will be lost!
a. OK
x. Cancel and return to the Previous Menu
2. Select either a to confirm the process or x to cancel the process.
Logout
The Logout menu item allows you to log out of the user interface and
return to the Login screen. Select i from the Main Menu to logout. After
this command is entered, the system logout occurs automatically.