Canon L90 - Manual (Page 197)

Machine Settings
9-10
FAX SETTINGS
2. DRPD:SELECT FAX Selects the ring pattern for fax calls.
NORMAL RING
DOUBLE RING
SHORT-SHORT-LONG
SHORT-LONG-SHORT
OTHER RING TYPE
–
–
–
–
–
3. INCOMING RING Sets whether or not to activate the ring alert of the handset or
an external telephone if <RX MODE> is set to <FaxOnly>.
Selecting <ON> allows you to learn the fax reception and
answer voice calls if you pick up the handset or an external
telephone while it is ringing.
ON The handset or an external telephone rings.
RING COUNT Sets the number of incoming rings before the machine answers.
(1TIMES–16TIMES (2TIMES))
OFF The handset or an external telephone does not ring. (In the
Sleep mode, the handset or an external telephone may ring one
or two times.)
4. REMOTE RX Sets whether to use remote receiving. (See Chapter 3, “Sending
and Receiving,” in the Reference Guide.)
ON The machine enables remote receiving.
REMOTE RX ID You can dial a code on remote extension to start receiving a
document.
A combination of two characters using 0 to 9. (default: 25)
OFF The machine disables remote receiving.
5. RX PRINT Sets whether to store all received pages in memory before
printing them out or print each page as it is received. (See
Chapter 3, “Sending and Receiving,” in the Reference Guide.)
MEMORY RX Print after all the pages of the document are received.
PRINT RX Print each page as it is received.