Chicago Electric 4 DRY TILE SAW 38941 - Manual (Page 2)

Page 2 SKU 38941 For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Motor 110 V~, 3.2 A (No Load)
RPM 10,525
Cutting Capacity 1-3/8”
Blade (sold separately) 4” Diameter x 5/8” Arbor
Overall Dimensions 9” x 7” x 7-3/4”
Overall Weight 7.6 lb.
Motor is double insulated
The Tile Saw comes with an Arbor wrench and a T-Handle Wrench. A Blade is not included
with the Tile Saw and must be purchased separately. Recommended saw blade is item #34441
- 4” Diamond blade-Dry type. Saw blades are available at Harbor Freight Tools.
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover. Write the
product’s serial number in the back of the manual near the assembly diagram, or write month
and year of purchase if product has no number. Keep this manual and invoice in a safe and dry
place for future reference.
Wet Cut Attachment
A Wet Cut Attachment (Item 38942) is also available through Harbor Freight Tools. This
attachment is not included with the Dry Tile Saw.
If you have purchased the Wet Cut Attachment (#38942) please see the assembly and
operating instructions for this attachment on page #8. Recommended blade when using the Wet
Cut attachment is item #34310 - 4” Diamond blade-Wet type (Continuous Rim Design).
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite ac-
cidents.
REV 08/01; 09e
#230373