Installation data — 50hq (see fig. 2.), Fig. 2 — dimensions and connections — 50hq, Step 3 — make piping connections – Carrier 50HQ User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table 2
MODEL
50HQ
ÒPÉR wt (ib) '
DIMENSIONS (ft-in )
A
B
C
D
E
SUPPLY DUCT CONN
(ft-in.)
F
G
ACCESSORY FILTER (1)
Size (in.)
^Includes 1-in accessory filter
Installation Data — 50HQ (See Fig. 2.)
042
014
018
022
027
033
185
195
210
220
230
250
3-10-3/8
1-10-3/16*
1-6
0- 3-7/16
0- 2-3/8
1- 1-3/8
0- 9-7/16
17 X 22-3/4
048
3Ò0
1-0-7/16
060
325
4-0
1
-
1 1
*
2-0-7/16
0-3-7/16
0- 2-3/8
1- 7-7/8
1-1-1/16
”360*
0-11-15/16
Replaceable Media
Return Air
Fig. 2 — Dimensions and Connections — 50HQ
Step 3 — Make Piping Connections
CONNECT WATER SUPPLY AND RETURN
LINES to water inlet and outlet pipe connections
shown in Fig. 4 and 5. Place plug in unused connec
tions. Use flexible hose for water line to reduce
possible vibration and improve unit serviceability.
Make sure hoses or pipes are suitable for system
water pressure and sized for proper flow rate.
CAUTION:
improper
heat
exchanger
water
flow due to piping, valving or improper pump
operation is hazardous to units.
For water flow and temperature data refer to
START-UP section, page 6.
CAUTION: Galvanized pipe or fiitiugs are not
recommended for use with these units due to
possible electrolysis.
«UT
8RACKET
Fig. 3 — Suspension Kit
Installation — 50HQ