Sears 580.761652 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

iF YOU HAVE ANY PROBLEMS operating your pres­

sure washer, please call the pressure washer helpline
at 1-800-222-3136.

HOW TO USE YOUR PRESSURE WASHER

WARNING NEVER adjust spray pattern

when spraying. NEVER put hands In front

of spray nozzle to adjust spray pattern.

You couid be injury.

HOW TO USE THE ADJUSTABLE NOZZLE

On the end of your spray gun is a nozzle that you
can slide forward and backward and that you can
aiso twist from side to side. With the adjustable noz­
zle you can adjust the spray pattern to be either high
pressure or low pressure. You can also adjust the
spray so it is concentrated in a stream pattern or
expanded into a fan pattern.

• Slide the nozzle forward when you wish to adjust

the spray to low pressure mode. Slide the nozzle
backward to achieve high pressure.

Pressure Mode

for low pressure
mode and detergent
application

Twisting the nozzle adjusts the spray pattern from
a narrow pattern to a fan pattern.

Twist nozzle counter­
clockwise for fan

spray pattern

Twist nozzle clock­
wise for narrow

spray pattern

For most effective cleaning, keep spray nozzle
between 8 to 24 inches away from cleaning sur­

face.

® if you get spray nozzle too close, especially using

high pressure mode, you may damage the clean­
ing surface.

HOW TO USE THE TURBO NOZZLE

The rotating turbo nozzle increases the area of the
high pressure stream.

IMPORTANT: You cannot apply detergent with this

nozzle.

To attach the turbo nozzle:

* Remove the adjustable nozzle from the gun.

® Attach the turbo nozzle.

Turbo Nozzle Adjustable Nozzle

APPLYING DETERGENT AND CLEANING WITH
ADJUSTABLE NOZZLE

IMPORTANT: Use soaps designed specifically for
pressure washers. Household detergents couid dam­
age the pump.

IMPORTANT; You must attach all hoses before you

start the engine. Starting the engine without ait the

hoses connected and without the water turned ON

will damage the pump.

To apply detergent follow these steps:

“ Prepare the detergent solution as required by the

job.

• Hang the detergent solution on the “J" hook on

the wire form on the guide handle.

» Place small filter on the clear, chemical injection

Slide the adjustable nozzle forward to low pres­
sure mode. Detergent cannot be applied with noz­

zle In high pressure position.

Advertising