Water hardness affects choice of laundry aids, Dispensers – Sears 93701 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

WATER HARDNESS
AFFECTS CHOICE OF

LAUNDRY AIDS

Water hardness is determined by
amount

of

minerals

in

water.

Minerals react with soap and form
scum and curd. Scum may remain

on laundry, causing yellowing or
gray, dingy clothing. HARDNESS
IS MEASURED IN GRAINS PER
GALLON.

Grains per Galion

SOFT

MED

HARD

VERY

HARD

0-3

4-6

7-10

over 11

If water hardness in your home is
over 7 grains, you will get better
washing results by:
• Using detergent instead of soap.
• Adding extra detergent to wash,

especially in cold water washes.

• Using a water conditioner.
• Installing a water softener.

If you do not knov/ the hardness of
your water supply, contact your
local water department or bring a
sample into Sears Store for testing.

STARCHES

Starch adds body to fabrics and
helps to keep them clean longer.
Follow

package

directions

for

starching in washer^

DYES

Follow package directions for dying
in the washer. After dying, clean
washer thoroughly by running a
complete cycle using detergent and 1

cup chlorine bleach.

The tub and agitator may become
dye stained but this will not harm

the finish or transfer color to other
wash loads.

Dispensers

LIQUID BLEACH

DISPENSER

[ ACAUTÌON1 Failure to follow

these directions can cause bleach
damage to wash load.

«

ALWAYS

USE

HIGH

WATER LEVEL.

MEASURE

LIQUID

BLEACH AS FOLLOWS,
DEPENDING

ON

SIZE

AND SOIL.

S M A L L L A R G E

E X - L A R G E

THEN ADD WATER
TO DISPENSER

Pour bleach in dispenser.
Then pour in water which
flushes bleach from dis­
penser so no bleach re­
mains in dispenser to carry
over to next load of wash.

POWDERED BLEACH must not
be used in bleach dispenser. Add
powdered bleach to wash water,

following directions on package.

FABRIC SOFTENER
DISPENSER (Optional)

TO

FILL:

Measure fabric softener

according to directions on package.
Add water to tO]D of peg. (Follow in­
structions

on

container;

some

softeners are already diluted.)

TO ATTACH: Place dispenser on

agitator cap and press down firmly.
Make sure lid is snapped firmly onto
dispenser.

To remove disi)enser from agitator
cap just pull up and off.

TO CLEAN DISPENSER:
Thoroughly rirse ouLjdisp^ser in
warm water to eliminate buildup of

fabric softener. Lid can be snapped
off for easier cleaning. After clean­
ing, snap lid firmly in place. Any
black, waxy residue can be removed
by washing in hot soapy water. Use
only bar soap products. Laundry or
dishwashing

detergents

are

not

suitable.

Page 5

Advertising
This manual is related to the following products: