Using the washer, Cycle selections, Use washer – Sears 93701 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Use

Washer

Remember—Select Water Temperature

and Water Level for each load.

WASH TEMPERATURE

COLD

WATER LEVEL

MEDIUM

SOAK/
PREWASH

PREWASH

HEAVY

OFF SOIL MEDIUM

LIGHT

COTTON

STURDY

-WARM

KNITS/
DELICATE

PULL ■ START PUSH - STOP

PERM

PRESS

■5|(- RINSE S SPIN

USING THE WASHER

1

. Prepare and sort laundry

as

directed on page 4.

2.

Measure correct amount of

laundry aids and add to empty
tub.

(Refer to pages 6 and 7 for

laundry products and water

hardness information.)

3.

If desired, add diluted liquid

bleach

asdirectediriBleachDis-

penser section on page 5. Do not
pour bleach directly onto wash
load.

4. Add wash load to tub.
5. Choose control settings

according to type of load and
amount of soil.

• WATER TEMPERATURE

Select

desired

wash/rinse

temperature combination. The
washer will not fill if the knob
is pointing between 2 settings.

See page 10 for suggested
settings.

• WATERLEVEL

Select water level that is best

for size of load washed. Water
should cover top of wash load.

6.

Push cycle selector knob in

and turn right (clockwise) to
desired wash cycle and time.

For best results, follow fabric
care

labels

for

washing

instructions.

7.

Turn on hot and cold water

faucets.

8.

Start washer

by closing lid and

pulling out timer knob. Washer
will operate with the lid open.
However, it will not go into spin
cycle unless lid is closed. To
stop washer or change cycle,
push in Cycle Selector knob and

turn it clockwise to desired

setting.

9.

Add fabric softener, if desired,

to final rinse.

Follow manufac­

turer's directions on product label.
(If a fabric softener dispenser is
available, follow directions on
page 5.)

10. After the last spin cycle, wait

approximately 1 to 2 minutes for
the safety lid lock to release.

Remove wash load for drying.

CYCLE SELECTIONS

COTTON STURDY This cycle
provides up to 18 minutes of normal
agitation, a spray rinse in the first spin
followed by a deep rinse and 8 minutes
of fast spin with a final spray rinse.
Set selector according to amount of
soil in each load.

PERM PRESS This cycle pro­
vides up to 12 minutes of normal
agitation followed by a 1 minute cool
down rinse to reduce wrinkling in the

first spin, a deep rinse and 6 minutes
of slow spin with a final spray rinse.
The slower spin speed minimizes
wrinkling during the final spin.

KNITS/DELICATE

This

cycle

provides 6 minutes of gentle agita­
tion followed by a spray rinse in the
first spin, a deep ;±ise and 4 minutes
of slow spin with; a spray rinse.

SOAK This cycle can be used to
treat heavily soiled or stained items
that may require more than one wash.
It provides 2 minutes of normal
agitation followed by 12 minutes of
soak, 2 minutes of normal agitation
and 6 minutes of fast spin. Use
recommended amounts of detergent
and bleach or soiiking agent for one
wash cycle. (See package labels for
amounts.) Cold water is used in this
cycle.

NOTE:

The Soak cycle should

always be followed by a wash cycle
using

recommended

amount

of

detergent.

PREWASH The Prewash portion
of the Soak cycle can be used alone to
help remove protein-based stains such
as milk, grass ancl blood or to loosen
soils

before

washing.

Prewash

provides 2 minutes of normal agitation
followed by 6 minutes of fast spin.

Use

recommended

^ount

of

detergent for one wash cycle, '^ater

temperature will t>e the same as wash

water temperature selected.

ACAUTION Llsing hot water in

Prewash can set stains. See Stain
Removal chart on page 7.

Page 9

Advertising
This manual is related to the following products: