Sears 917.249391 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FIGURE 14
TOP
COVER
A
YOUR SPRING LOADED MOWER DEFLEC
TOR SHIELD ¡FIG. 14) MUST NOT BE
REMOVED. SIMPLY ROTATE IT UP AND
HOLD IN UP POSITION WHILE AT
TACHING
CHUTE
EXTENSION.
THE
MOWER DEFLECTOR SHIELD CAN BE
RELEASED TO REST AGAINST CHUTE EX
TENSION. THIS WILL ASSURE DEFLEC
TOR SHIELD IS STILL ON MOWER IF
CHUTE EXTENSION OF GRASS CATCHER
ATTACHMENT IS REMOVED.
FIGURE 1S
ELBOW
SHIELD
13.
A ss& m ble chute extension to m ow er housing.
a. Insert chute extension pin into latch assernbiy
spacer {Fig. 14 - R .H . inset).
b.
Lift up slightly on L,H . side of chute extension
lining up spacers located on latch assem bly and
chute extension.
S ecure
R .H
side
of
chute
extension
to
latch
assem bly using: retainer spring (show n full size
below ). C hute extension and retainer spring fur
nished w ith grass catcher.
c.
1()