Customer responsibilities, General recommendations, Blade care – Sears 917.249491 User Manual

Page 12: Storage, To remove grass catcher

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CUSTOMER RESPONSIBILITIES

GENERAL RECOMMENDATIONS

Always observe safety rules when performing any mainte­

nance.

Before each use check for ioose fasteners.

Clean unit thoroughly after each use.

Re-

BLADE CARE

For best results mower blades must be kept sharp,
place bent or damaged blades

• See BLADE CARE instructions in your tractor owner's

manual.

CAUTION: BEFORE PERFORMING ANY
MAINTENANCE , SERVICE OR ADJUST­
MENTS:

Depress clutch brake pedal fully and set
parking brake.

Place gearshift/motion control lever in
"NEUTRAL" position.

Place clutch control in "DISENGAGED"
position.

Turn ignition key to "OFF" position.

Make sure blades and ail moving parts
have completely stopped.

Disconnect spark plug wire(s) from spark
plug(s)and place wire where it cannot come
in contact with plug.

STORAGE

When grass catcher is to be stored for a period of time,
clean it thoroughly, remove all dirt, grass, leaves, etc. Store

in a clean, dry piace.

A

CAUTION: Do not leave grass in bagger
containers. Empty containers after each

use and before storing. Failure to do so

may result in spontaneous combustion
which could develop into a fire.

TO REMOVE GRASS CATCHER

Reverse appropriate steps in ASSEMBLY section of this
manual.

A

CAUTION: Grass catcher components are
subject to wear, damage and deteriora­

tion, which could expose moving parts or

allow objects to be thrown. Frequently
check components and replace with
manufacturer's recommended parts, when
necessary.

12

Advertising