Kawasaki NINJA AO4590 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
ALIGN three holes in
handlebar and neck.
PLACE steering column
through neck and handlebar
for afignrhent.
Note: Pimple should face
away from neck.
PUSH 1J1/2” screw through
each outer hole.
ATTACH lock nut on end of
each screw.
TIGHTEN with screwdriver
and pliers.
2
REMOVE steering column
from handlebar assembly.
SLIDE steering column
through hole #1 in bottom of
steering linkage and through
top of body.
PLACE curved end of
steering column through hole
#2 in top bar of steering
linkage.(lf assembly is difficult,
insert steering column into hole
#2 and curved end into hole #1.)
Advertising