Kawasaki NINJA AO4590 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
2
OBTAIN upper headlight
housing,
THREAD switch and wire
through hole.
SNAP switch into hole.
ATTACH sound box harness
to sound box.
3
POSITION VEHICLE WITH
ALL FOUR WHEELS ON
FLOpR.
ATTACH cover plate with two
1/2” screws (silver).
TIGHTEN.
SLIDE lower headlight
housing on steering column.
SLIDE on neck and
handlebar.
Note: If neck/handlebar does
not fit right, check that
handlebar dimple is on top.
12
Advertising