Installation step 3, Hardware shown actual size, Attach the t-rail to the header bracket – Sears CRAFTSMAN 139.53640SRT User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Installation Step 3
Attach the T-rail to the Header Bracket
Header Wall
• Position the opener on the garage floor below the
header bracket. Use packing material as a
protective base.
If the door spring is in the way you'll need help.
Have someone hold the opener securely on a
temporary support to allow the T-ral! to clear the
spring.
• Position the cable pulley bracket against the header
bracket.
Align the bracket holes and join with a clevis pin as
shown.
Insert a ring fastener to secure.
Hardware Shown Actual Size
O
Clevis Pin
5/16''x2-3/4"
O
Ring Fastener
15
Advertising
This manual is related to the following products: