Humidifier operations, Assembly – Sears 758.14451 User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Humidifier Operations

Your new Sears humidifier is designed to
satisfy home humidity requirements
through the principle of evaporation of

water into the air.

After water is added to the bottle, the fit­

ters begin to soak up the water and

become totally saturated in approxi­
mately 30 minutes. Air is drawn in from

the rear of the humidifier, then passes
tfirough the fitters by means of a circula-
tioh fan; As air passes through the filters,

moisture is absorbed into the air and then
released through the top of the hurnidifìer.

This moist air is released in thè form of

vapor. No water droplets will enter the

home. Aii evaporatiori into the air takes
place irr the humidifier, which means that

the residue left by evaporating water is not

passed into the home, but remains in the

filter

\

CAUTION: Use only 42-14900 EPA

Registered Bacteriostat available

from SEARS Retail store. Under no

circumstances should you Use water

freatenent products designed for

Roto belt or Ultrasonic humidifiers.

Assembly

Your new Sears Kenmore humidifier is
completely assembled for you to use.

iHumidified Airis

Then Released

Through the Top

Dry Air

Enters

Through the

Rear

CAUTION: Keep your humidifier
clean. While humidifiers do not
cause colds, some studies suggest
that dirty humidifiers can cause cold­

like symptoms in some people. To

avoid this, we recommend you clean
your humidifier weekly vwth Humidi­
fier Cleaner 42-14713 and use Bacte­

riostat 42-14900. These are available

at your local Sears store.

Folfow the instructions of this owner's

manual for proper usage.

Advertising