Trouble shooting, How to order replacement parts, Model number - 247.799891 247.799892 – Sears 247.799892 User Manual

Page 15: Part number •part description

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TROUBLE SHOOTING

PROBLEM

POSSIBLE CAUSE(S)

CORRECTIVE ACTION

Engine fails to start

• Fuel tank empty, or stale fuel.

• Fill tank with clean, fresh fuel.

• Spark plug wire disconnected.

• Connect wire to spark plug.

• Faulty spark plug.

• Clean, adjust gap or replace.

Loss of power;

• Spark plug wire loose.

• Connect and tighten spark plug wire.

operation erratic

• Unit running on CHOKE.

• Move choke lever to OFF position.

• Blocked fuel line or stale fuel.

• Clean fuel line; fill tank with clean

fresh gasoline.

• Water or dirt in fuel system.

• Disconnect fuel line at carburetor to drain fuel

tank. Refill with fresh fuel.

• Carburetor out of adjustment.

• Adjust carburetor or contact your SEARS

Service Center.

• Dirty air cleaner.

• Service air cleaner. See Customer Responsibilities

section of this manual.

Engine overheats

• Carburetor not adjusted

properly.

• Contact your SEARS Service Center.

• Engine oil level low.

• Fill crankcase with proper oil.

Too much vibration

• Loose parts or damaged

impeller.

• Stop engine immediately and disconnect

spark plug wire. Tighten all bolts and nuts.

Make all necessary repairs. If vibration continues,
have unit serviced by a SEARS Service Center.

Unit does not
discharge

• Discharge chute clogged.

• Stop engine immediately and disconnect

spark plug wire. Clean flail screen and inside
of blower housing. See Service/Adjustments
section of this manual.

• Foreign object lodged in impeller.

• Stop engine immediately and disconnect

spark plug wire. Remove lodged object.

Rate of discharge

slows considerably or
composition of
discharged material
changes

• Shredding blade and/or chipper

blades dull.

• Sharpen or replace shredding and chipper

blades.

NOTE: For repairs beyond the minor adjustments listed above, please contact your nearest SEARS Service Center.

HOW TO ORDER REPLACEMENT PARTS

Each

chipper-shredder

has

its

own

model

number.

Each engine has its own model number.

The

model

number

for

your

chipper-shredder

will

be

found on a label attached to the frame.

The model number for the engine will be found on the

blower housing of the engine.

All

parts

listed

herein

may

be

ordered

through

Sears,

Roebuck

and

Co.

Service

Centers

and

most

Retail

Stores.

WHEN ORDERING REPAIR PARTS, ALWAYS GIVE
THE FOLLOWING INFORMATION;

•PRODUCT - “5 H.P. Chipper-Shredder”

•MODEL NUMBER - 247.799891

247.799892

•ENGINE MODEL NO. -135212-0272-01

135212-0140-01

•PART NUMBER

•PART DESCRIPTION

Your

Sears

merchandise

has

added

value

when

you

consider

that

Sears

has

service

units

nationwide

staffed

with

Sears

trained

technicians...professional

technicians

specifically

trained

on

Sears

products,

having

the

parts,

tools

and

the

equipment

to

insure

that

we

meet

our

piedge

to

you...“we

service

what

we

sell.”

15

Advertising
This manual is related to the following products: