Sears PRO FORM 831.29776 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. Attach the Pulse Sensor (114) to the Headband (115).
Make sure that the sensor window is pressed through
the indicated hole in the Headband.
Press open the clothes clip, and insert the pulse sensor
wire into the clothes clip. Make sure that the pulse
sensor wire Is resting against the hinge of the
clothes clip (see the Inset drawing). The use of the
pulse sensor is explained on page 8.
5. Remove the bacidng from the Adhesive Clip (90). Press
the Clip onto the Rear Roller Cover (82) in the indicated
location. Press the Alien Wrench (89) into the Clip.
Make sure that all parts are tightened before you use the
treadmill. Note: To protect the floor or carpet, place a mat
under the treadmill. For Information on ordering a mat,
see REPLACEMENT PARTS on the back cover.